2. Dry cycle mold - Validation procedure for injection molds
The second step in validating an injection mold according to injection mold validation flow chart is dry cycle mold . The steps before are: 1. Mold certification Purpose: The purpose of the dry cycle mold is to evaluate the mold mechanical actions for any gross problems prior to injecting plastic into the mold. The machine operator at the mold builder or molder should know how to adjust the settings on the injection unit to cycle the mold without injecting plastic into the tool. If at anytime during the dry cycle procedure there is a possibility that damage is being done to the tool or if the mold is not operating as designed, pull the mold from the press and have it examined by an experienced mold builder. This stage is often carried out prior to the customer being invited to the mold builder for the debug. If there are any machine/mold operation issues it is preferable for the mold builder to remedy this before customer attendance, saving unnecessary travel. If there is a serious ...